Hail Exposure in Kennewick, WA

Kennewick, WA has recorded 19 hail events within a 15-mile radius since 2015, based on NOAA NEXRAD radar data. Each of these events represents a verified storm detection from the NOAA radar network.

The average hail size recorded near Kennewick is 1.01 inches. The largest single event recorded reached 1.5 inches. Hail above 1 inch is capable of cracking shingles, and hail above 1.75 inches can cause severe structural damage requiring full roof replacement.

Hail season in Washington typically runs spring and early summer (April through July). During these months, atmospheric conditions create powerful convective thunderstorms capable of producing large hail. Kennewick residents should inspect their roofs after any storm and consider a professional inspection each spring.

Yes, standard homeowner's insurance policies in Washington typically cover hail damage as part of the "wind and hail" peril. Most policies require you to file a claim within 1–2 years of the storm date, though this varies by insurer and state law. It's important to document damage promptly. Even if damage isn't visually obvious from the ground, a licensed roofer can identify hail impacts during a free inspection.

Start by looking for obvious signs from the ground: dented gutters, dings on metal vents, chipped paint, or broken skylight glass. On the roof itself, hail damage appears as dark circular bruises or "spatter" marks on asphalt shingles where granules have been knocked away. Because roof damage is often subtle, many Kennewick homeowners miss it without a professional inspection. If HailScore shows events of 1 inch or larger near your property, scheduling a free inspection with a local contractor is strongly recommended.

A HailScore is a 0–100 risk index that measures historical hail activity near a specific property. The score is calculated from five factors derived from NOAA NEXRAD radar data: storm frequency (how many events), recency (recent storms score higher), hail size (larger hail = more damage potential), cumulative damage (repeated storms compound wear), and proximity (storms closer to your address weigh more). A score of 0–30 is low risk, 31–60 is moderate, 61–80 is significant, and 81–100 indicates a high-impact hail history.

If your property is in Kennewick and any nearby storms have produced hail of 1 inch or larger, a free professional roof inspection is highly recommended. Given that Kennewick has recorded hail up to 1.5 inches, there is a real probability of roof damage that insurance may cover. Many roofing contractors in WA offer free inspections and can document damage for your insurance claim at no upfront cost.

Hail damage repair costs in Kennewick typically range from $3,000–$12,000 depending on roof size and damage extent. The final cost depends on roof size, pitch, material type (asphalt shingles vs. metal vs. tile), and the extent of damage. In most cases, if hail damage is confirmed, your homeowner's insurance will cover the cost of repair or replacement minus your deductible. Getting multiple contractor estimates before filing a claim is a smart approach.

HailScore uses data from the NOAA NEXRAD radar network (Next Generation Weather Radar), specifically the SWDI (Severe Weather Data Inventory) maintained by NCEI (National Centers for Environmental Information). For Kennewick, we analyze all radar-detected hail events within a 15-mile radius from 2015 to present, totaling over 19 verified events. Each record includes the storm's timestamp, geographic coordinates, and measured hail diameter in inches.

HailScore data comes directly from NOAA's NEXRAD radar network, which is the same system used by the National Weather Service for official storm reporting. Radar detection has a small margin of error. Hail size estimates can vary by ±0.25 inch compared to ground truth measurements. We use the 15-mile radius to capture hail that may have affected your specific neighborhood even if the storm center was nearby. For the most precise assessment of your individual property, a physical roof inspection by a licensed contractor is always recommended.